X-fix milling jigs
The challenge:
Connecting cross-laminated timber panels at the front or corners without using steel parts or screws is complicated and time-consuming.
The solution:
With the X-fix milling templates, the millings for the patented and ETA-18/0254
approved X-fix wood connector, and the components can be connected to each other very quickly and optimally.
Milling jigs
X-fix C for panel cross-connections, X-fix L for panel longitudinal connections
-
X fix C
-
X-fix C mini
-
X-fix L
Possibilities
X-fix C
X-fix L
Video
Advantages
-
Mobile for workshop or construction site
Big for the workshop but not too big for the job site, making it easy to transport.
-
Safe work thanks to the patented milling guide
The router is securely hooked into the routing guide with the locking plate by turning it 90 degrees. This allows you to work safely and without tiring.
-
High added value
By processing wooden components in-house, the added value remains in your company.
-
Modular concept
Some components such as the locking plate, various stops, etc. are interchangeable and can be combined with other Lignatool milling systems.
-
Fast assembly
Save valuable working time through quick assembly on the construction site.
-
High quality craftsmanship
Wooden connections are aesthetically very demanding, which is especially important for orders with visible wooden structures.
-
Rebuildable
Enables efficient, reliable and non-destructive dismantling of buildings and projects.
-
Permit
With our approval ETA-18/0254 we offer you guaranteed quality and reliability.
-
Statics
Let yourself be convinced and inspired by the static resilience of this high-quality wood connection.
X-fix C routing template
These components make the routing templates so special.
Collapsible content
Base plate
The template is made of anodized aluminum and stainless steel mounting bushes that can be replaced when worn.
Stops
The adjustable stops are located on the underside of the template.
Attachment
It can be attached either with screws or lever clamps.
Milling guide
Consists of anodized aluminum with special plain bearings. The router is hooked into the safety routing guide with the locking plate. This allows you to work safely and without tiring.
Locking plate
The locking plate is made of plastic and is screwed to the underside of the router.
Contour ring
Attaches to the locking plate with a locking ring. During milling, the contour ring slides along the template and the stops and thus scans the milling contour.
Fine tuning
The milling contour is adjustable so that the clamping force of the wood connection can be regulated.
Routers
The following routers can be used:
- Festool OF2200
- Festool OF1400
- Mafell LO65
- Scheer HM16-HM25 (adapter required)
- DeWalt 626
- Makita RP2300 (cutter with special shank)
- Others on request
Milling cutter with reversible blade
The cutters have a ø20mm cone shank and are screwed directly into the cone of the router with a double-threaded nut.
Different overall lengths are available, the diameter is 30mm, the working length is 60mm.
A contour ring is required for routing along the template.
Dimensions - milling depth
It can be milled to a depth of 90mm.
X-fix L routing template
These components make the routing templates so special.
Collapsible content
Base plate
The template is made of anodised aluminium, the router is screwed directly onto the base plate and hooked into the guide profile.
Guiding profile
The guide profile 80x40mm consists of 2 anodized aluminum profiles with a length of 150cm each which are screwed together with profile connectors to a total length of 300cm. The router is hooked into the guide profile with the base plate. This allows you to work safely and without tiring.
Attachment
The guide profile can be fastened either with screws or with lever clamps.
Lateral guidance
The lateral guide is set to the desired milling center distance.
Routers
The following routers can be used:
- Festool OF2200
- Mafell LO65
- Scheer HM16-HM25 (adapter required)
- DeWalt 626
- Others on request
Profile milling cutter with exchangeable blade
The profile cutter has a cone shank ø20mm and is screwed directly into the cone of the router with a double-threaded nut.
Editing
Milling can be done on the top or on the front.
Packages
Collapsible content
X-fix C
Milling size: 96x130mm
Milling depth: up to 90mm
Scope of delivery:
- Systainer
- Routing template
- Milling guide
- Stop
- Locking plate
- Contour ring
- Helicut cutter Ø 30mm with turnblade
Depending on the router, there are different locking plates and cutters, so the configuration and prices may vary.
X-fix C mini
Milling size: 45x65mm
Milling depth: up to 45mm
Scope of delivery:
- Systainer
- Routing template
- Milling guide
- Stop
- Locking plate
- Contour ring
- Milling cutter Ø 12mm
Depending on the router, there are different locking plates and cutters, so the configuration and prices may vary.
X-fix L
Milling depth: up to 42mm
Scope of delivery:
- Systainer
- Routing template
- Lateral guidance
- Guiding profile
- Profile milling cutter with exchangeable blade
Depending on the router, there are different locking plates and cutters, so the configuration and prices may vary.
X-fix fasteners
-
X-fix C 65/130 connector
-
X-fix C 45/60 connector
-
X-fix L 50/80 connector