Universal milling jig
The challenge:
Diagonal wood cuts or millings can only be made by hand or with expensive CNC machines.
The solution:
With the Lignatool universal template, inclined as well as flat millings of different depths and sizes can be created quickly and easily.
Possibilities
Video
Advantages
-
Mobile for workshop or construction site
Big for the workshop but not too big for the job site, making it easy to transport.
-
Safe work thanks to the patented milling guide
The router is securely hooked into the routing guide with the locking plate by turning it 90 degrees. This allows you to work safely and without tiring.
-
High added value
By processing wooden components in-house, the added value remains in your company.
-
Scope of delivery
The packages are put together differently depending on the purpose and budget and can be individually adapted at any time.
-
Modular concept
Some components such as the locking plate, various stops, etc. are interchangeable and can be combined with other Lignatool milling systems.
-
High quality craftsmanship
Wooden connections are aesthetically very demanding, which is especially important for orders with visible wooden structures.
Components
Base plate
The template is made of anodized aluminum and stainless steel mounting bushes that can be replaced when worn.
Scales
Scales made of black anodized aluminum with light engraving for high reading contrast, resistant to solvents and mechanical stress.
Attachment
Fastening can be done either with screws or with mounting brackets with lever clamps.
Milling guide
Consists of anodized aluminum with special plain bearings. The router is hooked into the patented safety routing guide with the locking plate. This allows you to work safely and without tiring.
Locking plate
The locking plate is made of plastic and is screwed onto the soleplate of the router.
Suitable for the following routers:
- Mafell LO65
- Festool OF2200
- Festool OF1400
- Scheer HM16-HM25
- DeWalt 625 / 626
- Makita RP2300
- Bosch GOF2000
- Other models on request
Contour ring
Attaches to the locking plate with a locking ring. During milling, the contour ring slides along the template and the stops and thus scans the milling contour.
Angled and tilt-adjustable stops
The template can be used at an angle, as with stair treads, or with the angle setting at an angle, as with strut offset.
Angle setting in degrees or percent
The exact inclination can be set on the angle setting scale in degrees or percent.
Routers
The following routers can be used:
- Festool OF2200
- Festool OF1400
- Mafell LO65
- Scheer HM16-HM25 (adapter required)
- DeWalt 626
- Makita RP2300 (cutter with special shank)
- Other models on request
Milling cutter with reversible blade
The cutters have a ø20mm cone shank and are screwed directly into the cone of the router with a double-threaded nut.
Different overall lengths are available, the diameter is 30mm, the working length is 60mm.
Dimensions
The template is 400mm wide and 770mm long. The maximum milling area is 310x550mm, the maximum incline is 20 degrees.
Special shapes
Form plates can be made according to customer requirements, these are attached to the base plate with four screws.
Variants
Universal milling template
For flat machining.
- Width max. 310mm
- Maximum length 550mm
Universal milling template with angle adjustment
For flat and inclined machining.
- Width max. 310mm
- Maximum length 550mm
- Inclination max. 25 degrees
Packages
Universal milling template
Scope of delivery:
- Base plate
- Side stops
- Central axis indicators
- Clamp fixation
- Lever clamps
- Milling guide
- Milling guide stopper
There are different locking plates and cutters, so these are not included in the package.
Universal milling template with angle adjustment (image)
Scope of delivery:
- Base plate
- Side stops
- Central axis indicators
- Clamp fixation
- Lever clamps
- Milling guide
- Milling guide stopper
- Milling edge indicator
- Angle setting with scale
There are different locking plates and cutters, so these are not included in the package.
