Log blank milling jig
The challenge:
The production of log house corner joints is actually only possible with expensive special machines for log house construction, for occasional use these machines are too expensive and unprofitable.
The solution:
With the completely new double dovetail wood connection developed by us, airtight corner and wall connections can be made quickly
and easy to implement.
Possibilities
Advantages
-
Mobile for workshop or construction site
Supplied in a practical and waterproof plastic box (systainer) and is therefore easy to transport.
-
Safe work thanks to the patented milling guide
The router is securely hooked into the routing guide with the locking plate by turning it 90 degrees. This allows you to work safely and without tiring.
-
High added value
By processing wooden components and wood connections in-house, the added value remains in your company.
-
Scope of delivery
The packages are put together differently depending on the purpose and budget and can be individually adapted at any time.
-
Modular concept
All components such as milling guide, chip protection, stops are interchangeable, so only the base plate needs to be exchanged for other tenon shapes or sizes.
-
High quality craftsmanship
Wooden connections are aesthetically very demanding, which is especially important for orders with visible wooden structures.
Components
Systainer
Supplied in a practical Systainer with foam insert.
Milling jigs
Tenon template and variably adjustable hole template made of anodized aluminum and bushings made of stainless steel that can be replaced when worn.
Scales
Scales made of black anodized aluminum with light engraving for high reading contrast, resistant to solvents and mechanical stress.
Milling guide
The router is hooked into the patented safety routing guide with the locking plate. This allows you to work safely and without tiring.
Locking plate
The locking plate is made of plastic and is screwed onto the soleplate of the router.
Suitable for the following routers:
- Mafell LO65
- Festool OF2200
- Festool OF1400
- Scheer HM16-HM25
- DeWalt 625 / 626
- Makita RP2300
- Bosch GOF2000
- Other models on request
Setting gauge
The tenon length is set with the setting gauge. The milling cutter diameter, the race diameter, the tenon length and the hole depth can also be measured.
Horizontal stop
The horizontal stop has a fixed angle of 90 degrees, which is used to set the beam height.
Vertical stop
The vertical stop has a fixed angle of 90 degrees so that the beam width can be adjusted.
Chip protection
The horizontal chip guard is clipped onto the spigot template from above.
The vertical chip protection is pushed from above into the guide groove of the milling guide on the spigot template.
Clamp fixation
For quick fixation of the tenon template on the beam, with a lever clamp.
Cutter
Milling cutter with reversible blade and race. It is attached with a double-threaded nut directly into the conical shank of the router. Adapters are available for some routers without a conical shank or with a different tool holder.
Variable tenon lengths
By changing the bearing ring, 3 different tenon lengths can be milled.
- 28mm
- 25mm (standard tenon length)
- 20mm
Routers
The following routers can be used:
- Festool OF2200
- Festool OF1400
- Mafell LO65
- Scheer HM16-HM25 (adapter required)
- DeWalt 625/626
- Makita RP2300 (cutter with special shank)
- Others on request
Sizes
